Maintenance and Adjustment
•
Set the 'opening' cable adjuster at the
throttle body end of the cable to give
0.08-0. 1 2 in (2-3 mm) of play at the
twist grip. Tighten the locknut.
3
4
ccip
1
Locknuts
2
Opening Cable Adjuster
3
Closing Cable Adjuster
4
Closing
Cable
Measurement Point
•
Make any minor adjustments as
necessary to give 0.08-0. 1 2 in (2-3
mm) of play using the adjuster near the
twist grip end of the cable. Tighten the
locknut.
•
With the throttle fully closed, ensure
that there is 0.08-0. 1 2 in (2-3 mm) of
free play in the 'closing' cable. Adjust as
for the 'opening' cable if necessary.
Tighten the locknut.
68
Ensure that both the adjuster locknuts of
both cables are tightened as a loose
1
locknut could result in a sticking throttle.
An incorrectly adjusted, sticking or stuck
throttle can lead to loss of motorcycle
control and an accident.
2
•
Reconnect the battery, positive (red)
lead first.
•
Reinstall the seat.
•
Check that the throttle opens smoothly,
without undue force and that it closes
without sticking.
•
Ride
authorized Triumph dealer and have
them
thoroughly before riding again.
-
Free-play
Warning
carefully
to
your
nearest
check
the
throttle
system