Suggested Suspension Settings - Triumph Bonneville Handbook

Warning
Ensure that the adjusters are set to the
same setting on both rear suspension
units. Settings which vary from left to right
may affect handling and stability resulting
in loss of motorcycle control, and an
accident.

Suggested Suspension Settings

Front adjuster settings refer to the number of
exposed graduation lines. There are seven
adjuster positions in total. Position one gives
the maximum amount of spring pre-load.
Rear adjuster settings are counted from one
with position one being with the adjuster
turned fully counter-clockwise. There are five
adjuster positions in total. Position one gives
the minimum amount of spring pre-load.
Maintenance and Adjustment
Warning
Ensure that the correct balance between
front and rear suspension is maintained.
Suspension imbalance could significantly
change handling characteristics leading to
loss of control and an accident.
the chart for further information or consult
your Triumph dealer.
Loading Front
Condition Adjuster
Position*
Solo Riding 6
- Softer
Solo Riding 4
- Standard
Solo Riding 2
- Firmer
Rider and 2
Passenger
* Thruxton only
NOTE
• The details given in the table are
to be used as a guide only where
the rider and passenger each
weigh 198 lb (90 kg) or less.
Setting requirements should be
increased for heavier riders and
passengers according to personal
preferences.
Refer to
Rear
Adjuster
Position
1
2
3
5
83