Rear Light; Rear Light Replacement - Both Models; Direction Indicator Lights; Bulb Replacement - Daytona 675 - Triumph Daytona 675 Handbook

Maintenance and Adjustment
Disconnect the multi-pin electrical connector
from the bulb to be replaced and remove the
rubber cover.
Detach the wire retainer from its clip (do not
remove the screw) then remove the bulb
from the light unit.
Position Lamp Bulb Replacement
To remove the position lamp bulb:
Without pulling the wires, ease the bulb
holder from its socket. The bulb is removed
from its holder by pulling gently upwards.
Installation for both bulbs is the reverse of the
removal procedure. Tighten the headlight
clamp to 4 Nm.
Warning
Do not reconnect the battery until the
assembly process has been completed.
Premature battery reconnection could
result in ignition of the battery gases
causing risk of injury.
Caution
When reconnecting the battery, connect
the positive (red) lead first.
108

Rear Light

Rear Light Replacement - Both
Models
The rear light unit is a sealed, maintenance
free LED unit.

Direction Indicator Lights

Bulb Replacement - Daytona 675

1
ccoa
1. Indicator lens
2. Securing screw
The lens on each indicator light is held in
place by a securing screw located in the body
of the light.
Release the screw and remove the lens to
gain access to the bulb for replacement.
2