Headlight Bulb Replacement - Street Triple - Triumph Daytona 675 Handbook

To replace a bulb:
Remove the rider's seat.
Disconnect the battery, negative (black) lead
first.
Remove the four screws and remove the bulb
cover from the bulb to be replaced.
Disconnect the multi-plug from the bulb
retainer.
Detach the bulb retainer from the headlight
assembly by rotating it counter-clockwise.
Remove the bulb from the bulb retainer.
Installation is the reverse of the removal
procedure.
Position Lamp Bulb Replacement
cdlr
1. Bulb holder
2. Position lamp bulb
The position lamps are fitted to the left and
right of each headlight. To replace a bulb,
remove the two screws and remove the bulb
cover, detach the rubber retainer from the
headlight and pull out the bulb.
Installation is the reverse of the removal
procedure.
Maintenance and Adjustment
Headlight Bulb Replacement -
Street Triple
1
2
cbnp
1. Headlight bulb
2. Bulb clip
3. Position lamp bulb
2
The bulbs become hot during use. Always
1 allow sufficient time for the bulbs to cool
before handling. Avoid touching the glass
part of the bulb. If the glass is touched or
gets dirty, clean with alcohol before reuse.
Remove the seat.
Disconnect the battery, negative (black) lead
first.
Undo the fixing securing the headlight clamp
to the headlight body.
Support the headlight while removing the
clamp.
Remove the headlight from its bowl while
supporting it to prevent the cables from
being over extended.
3
Warning
107