Throttle Grip; Inspection - Triumph America Handbook

Throttle Grip

1
2
cbmx
1. Throttle grip
2. 0.08 - 0.12 in (2 - 3 mm)
Warning
The throttle grip controls the throttle valves
in the throttle bodies. If the throttle cables
are incorrectly adjusted, either too tight or
too loose, the throttle may be difficult to
control and performance will be adversely
affected.
Check the throttle grip free play in
accordance with scheduled maintenance
requirements and make adjustments as
necessary.
Always be alert for changes in the 'feel' of
the throttle and have the throttle system
checked by an authorized Triumph dealer
if any changes are detected. Changes can
be due to wear in the mechanism, which
could lead to a sticking throttle.
An incorrectly adjusted, sticking or stuck
throttle will lead to loss of motorcycle
control and an accident.
Maintenance and Adjustment

Inspection

2
cbmx
1. 'Opening' cable adjuster - twist grip
end
2. 'Closing' cable
• Check that
smoothly, without undue force and
that it closes without sticking. Have
your authorized Triumph dealer
check the throttle system if a
problem is detected or any doubt
exists.
• Check that there is 0.08 - 0. 1 2 in
(2 - 3 mm) throttle grip free play
when lightly turning the throttle grip
back and forth.
• If there is an incorrect amount of
free play, Triumph recommends that
you have adjustments made by an
authorized
However, in an emergency, throttle
adjustments
follows:
1
the throttle opens
Triumph dealer.
may be made as
63