Front Brake Fluid Level Inspection
and Adjustment
1
T908040
1. Upper level line, front brake
2. Lower level line, front brake
•
To inspect the front fluid level, check
the level of fluid visible in the
window at the front of the reservoir
body.
•
The brake fluid level must be kept
between the upper and lower level
lines (reservoir held horizontal).
•
To adjust the fluid level, remove the
cap screws and detach the cover
noting the position of the sealing
diaphragm.
•
Fill the reservoir to the upper level
line using new DOT 4 fluid from a
sealed container.
•
Install the cover, ensuring that the
diaphragm
seal
positioned between the cap and
reservoir body.
•
Tighten the cap retaining screws.
Maintenance and Adjustment
Rear Brake Fluid Level Inspection
and Adjustment
2
ccit
1. Upper level, rear brake
2. Lower level, rear brake
•
The rear brake fluid level is visible
from the front without removing the
reservoir or cover.
•
The brake fluid level in the rear
reservoir must be kept between the
upper and lower level lines.
•
To adjust the rear brake fluid level,
remove the screw securing the
reservoir to the frame and detach
the reservoir cover.
•
While holding the reservoir upright,
remove the cover noting the position
of the diaphragm inside.
•
Fill the reservoir to the upper level
line using DOT 4 fluid from a sealed
container.
is
correctly
1
2
73