Introduction
LAN Features
•
4-Port Switching Hub.
The TEW-435BRM incorporates a 4-port 10/100BaseT
switching hub, making it easy to create or extend your LAN.
•
DHCP Server Support.
Dynamic Host Configuration Protocol provides a dynamic IP
address to PCs and other devices upon request. The TEW-435BRM can act as a DHCP
Server for devices on your local LAN and WLAN.
Configuration & Management
•
Easy Setup.
Use your WEB browser from anywhere on the LAN or WLAN for
configuration.
•
Configuration File Upload/Download.
Save (download) the configuration data from
the TEW-435BRM to your PC, and restore (upload) a previously-saved configuration file
to the TEW-435BRM.
•
Remote Management.
The TEW-435BRM can be managed from any PC on your LAN
or Wireless LAN. And, if the Internet connection exists, it can also (optionally) be
configured via the Internet.
•
Network Diagnostics.
You can use the TEW-435BRM to perform a Ping or DNS
lookup.
Security Features
•
Password - protected Configuration
. Password protection is provided to prevent
unauthorized users from modifying the configuration data and settings.
•
Wireless LAN Security
. WPA-PSK, WEP and Wireless access control by MAC
address are all supported. The MAC-level access control feature can be used to prevent
unknown wireless stations from accessing your LAN.
•
NAT Protection.
An intrinsic side effect of NAT (Network Address Translation)
technology is that by allowing all LAN users to share a single IP address, the location and
even the existence of each PC is hidden. From the external viewpoint, there is no network,
only a single device - the TEW-435BRM.
•
Firewall.
All incoming data packets are monitored and all incoming server requests are
filtered, thus protecting your network from malicious attacks from external sources.
•
Protection against DoS attacks.
DoS (Denial of Service) attacks can flood your
Internet connection with invalid packets and connection requests, using so much
bandwidth and so many resources that Internet access becomes unavailable. The TEW-
435BRM incorporates protection against DoS attacks.
Package Contents
The following items should be included. If any of these items are damaged or missing, please
contact your dealer immediately.
•
The TEW-435BRM Unit
•
1 Cat-5 Ethernet (LAN) cable
•
1 RJ-11 (ADSL) cable
•
1 RJ-11 to RJ45 cable (Germany only)
•
Power Adapter
•
Quick Installation Guide
•
CD-ROM containing the on-line manual.
Wireless ADSL Router User Guide
Physical Details
Front-mounted LEDs
Power LED
(Green)
Status LED
(Yellow)
LAN
WLAN LED
WAN
Internet
3
Figure 2: Front Panel
On - Power on.
Off - No power.
Off - Normal operation.
Blinking - This LED blinks during start up, and during a Firmware Up-
grade.
For each port, there are 2 LEDs, to indicate the connection speed
(10BaseT or 100BaseT) of each port.
•
100BT - This will be ON if the LAN connection is using 100BaseT,
and Blinking if data is being transferred via the corresponding LAN
port.
•
10BT - This will be ON if the LAN connection is using 10BaseT, and
Blinking if data is being transferred via the corresponding LAN port.
•
If neither LED is on, there is no active connection on the correspond-
ing LAN port.
On - Wireless enabled.
Off - No Wireless connections currently exist.
Flashing - Data is being transmitted or received via the Wireless access
point. This includes "network traffic" as well as user data.
On - ADSL connection established. (This is a low-level connection, it
does not mean Internet access is available.)
Off - No ADSL connection currently exists.
Flashing - Data is being transmitted or received via the ADSL connec-
tion.
On - Internet connection is available.
Off - No Internet connection available.
Flashing - Data is being transmitted or received via the ADSL connec-
tion.
4