E-Mail - TRENDnet TEW-435BRM User Manual

Advanced Administration
Include in Log
Use these checkboxes to determine which events are included in
Include (Checkboxes)
the log. Checking all options will increase the size of the log, so
it is good practice to disable any events which are not really
required.
•
Attempted access to blocked sites - If checked, attempted
Internet accesses which were blocked are logged.
•
Connections to the Web-based interface of this Router - If
checked, this will log connections TO this Router, rather
than through this Router to the Internet.
•
Router operation - If checked, other Router operations (not
covered by the selections above) will be logged.
•
Known DoS attacks and Port Scans - If checked, Denial of
Service attacks, as well as port scans, will be logged.
Syslog
Data is not sent to a Syslog Server.
Disable
Broadcast on LAN The Syslog data is broadcast, rather than sent to a specific Syslog
server. Use this if your Syslog Server does not have a fixed IP
address.
Send to this Syslog If your Syslog server has a fixed IP address, select this option,
Server and enter the IP address of your Syslog server.
Wireless ADSL Router User Guide

E-mail

This screen allows you to E-mail Logs and Alerts. A sample screen is shown below.
Data - E-mail Screen
E-Mail Notification
Turn E-mail
Notification on
Send to this E-
mail address
Outgoing (SMTP)
Mail Server
My SMTP Mail
Server requires
authentication
User Name
Password
75
Figure 62: E-mail Screen
Check this box to enable this feature. If enabled, the E-mail address
information (below) must be provided.
Enter the E-mail address the Log is to be sent to. The E-mail will
also show this address as the Sender's address.
Enter the address or IP address of the SMTP (Simple Mail Transport
Protocol) Server you use for outgoing E-mail.
To stop spanners, many SMTP mail servers require you to log in to
send mail. In this case, enable this checkbox, and enter the login
information (User name and Password) in the fields below.
If you have enabled "My SMTP Mail Server requires authentication"
above, enter the User Name required to login to your SMTP Server.
If you have enabled "My SMTP Mail Server requires authentication"
above, enter the password required to login to your SMTP Server.
76