Home Screen; Adsl Screen; Operation - TRENDnet TEW-435BRM User Manual

Modem Mode

Home Screen

If in Modem mode, the home screen will look like the example below.
Figure 68: Home Screen - Modem Mode
Note that the menu has changed, many of the options in Router mode are not available. The
screens available are:
•
Mode - change back to Router mode, if desired.
•
ADSL - set ADSL parameters. See the following section for details.
•
LAN - set IP address and mask. This is the same as in Router mode, except that the
DHCP server is not available while in Modem mode.
•
Wireless - this screen, and related sub-screens, is the same as in Router mode.
•
Password - this screen is the same as in Router mode.
•
Upgrade Firmware - this screen is the same as in Router mode.
•
Status - displays current settings and status. See the following section for details.
Wireless ADSL Router User Guide

ADSL Screen

This screen is used to set the ADSL parameter used by the modem.
Data - ADSL Screen
Multiplexing Method
VPI
VCI

Operation

Operation is automatic and transparent.
•
Wireless clients can connect to the Access Point if they have the correct SSID and
security, but they must obtain an IP address from the DHCP Server on your LAN.
•
The modem will act like any other ADSL modem. No routing will be performed, and no
client login will be done. If a client login is required, it must be performed by your
Router/Gateway or by software on your PC.
87
Figure 69: ADSL Screen
Check with your ISP or DSL service provider to find whether
your Multiplexing Method is VC-BASED or LLC-BASED.
Enter the value proposed by your ISP or DSL service provider.
Enter the value proposed by your ISP or DSL service provider.
88