Remote Administration - TRENDnet TEW-435BRM User Manual

Advanced Administration

Remote Administration

If enabled, this feature allows you to manage the TEW-435BRM via the Internet.
Figure 64: Remote Administration Screen
Data - Remote Administration Screen
Remote Administration
Check to allow administration/management via the Internet. (To
Enable Remote
Management connect, see below).
If Disabled, this device will ignore Administration connection
attempts from the Internet.
Current This is the current address you will use when accessing this device
IP Address from the Internet. To connect, see details and an example below.
Port Number Enter a port number between 1 and 65535. The default for HTTP
(Web) connections is port 80, but using port 80 will prevent the use
of a Web "Virtual Server" on your LAN. So using a different port
number is recommended. The default value is 8080.
The port number must be specified in your Browser when you
connect. See the following section for details.
Access Permission
Select the desired option.
Allow Remote
Access
•
Everyone - allow access by everyone on the Internet.
•
Only This Computer - allow access by only one IP address.
Enter the desired IP address.
•
IP Address Range - allow access from a range of IP addresses
on the Internet. Enter a beginning and ending IP address to
define the allowed range.
For security, you should restrict access to as few external IP
addresses as practical.
Wireless ADSL Router User Guide
To connect from a remote PC via the Internet
1. Ensure your Internet connection is established, and start your Web Browser.
2. In the "Address" bar, enter "HTTP://" followed by the Internet IP Address of the TEW-
435BRM. If the port number is not 80, the port number is also required. (After the IP
Address, enter ":" followed by the port number.)
e.g.
This example assumes the WAN IP Address is 123.123.123.123, and the port number is
8080.
3. You will then be prompted for the login name and password for this device.
79
HTTP://123.123.123.123:8080
80