User-Defined Services - TRENDnet TEW-435BRM User Manual

Advanced Features

User-defined Services

Services are used when creating Firewall Rules.
If you wish to create a firewall rule, but the required service is not listed in the "Service" list,
you can use this feature to define the required service or services. Once created, these services
will be listed in the "Service" list, and can be used when creating Firewall Rules.
Figure 52: Add Services Screen
Data - User-defined Services
Services
Existing Services This lists any Services you have defined. If you have not defined any
Services, this list will be empty.
Once you define some services, they will be listed here, and also
shown in the Service list used to create Firewall rules. (User-defined
services are at the end of the list, after the pre-defined services.)
Add Use this to open a sub-screen where you can add a new service.
Edit To modify a service, select it, and then click this button.
Delete Use this button to delete the selected service. You can delete any
services you have defined.
Wireless ADSL Router User Guide
Add/Edit Service
This screen is displayed when the Add or Edit button on the Services screen is clicked.
Data - Add/Edit Service
Services
Name
Type
Start Port
Finish Port
61
Figure 53 : Add/Edit Service
If editing, this shows the current name of the Service.
If adding a new service, this will be blank, and you should enter a
suitable name.
Select the protocol used by the Service.
Enter the beginning of the port range used by the Service.
Enter the end of the port range used by the Service.
62