Selecting Audio Output Channels - Canon XM2 Instruction Manual

Selecting Audio Output Channels

E
When you play back a tape whose audio has been recorded on multiple channels, you can change
the output channels of that sound.
PLAY
+
TAPE
(VCR)
VCR SET UP
( 18)
1. Load a tape recorded with multiple-channel audio.
2. Open the menu and select VCR SET UP. Then select OUTPUT CH, set it to the
desired setting and close the menu.
• Refer to the following list.
OUTPUT CH Setting
L/R
L/L
R/R
110
OUTPUT CH••• L/R
Playback Sound
Tape Recorded With
Stereo Sound
L+R channels
L channel only
R channel only
Tape Recorded On
Multiple Channels
main + sub
main only
sub only