Turning Off the Tally Lamp
The tally lamp lets you know that the camcorder is recording.
However, its flashing may be reflected into the lens during
close-up recording, or when recording through glass.
You may therefore decide to turn it off.
+
TAPE
CAMERA
SYSTEM
(
18)
1. Open the menu and select TALLY LAMP.
2. Select the OFF setting and close the menu.
• The tally lamp no longer flashes during recording, but it will still light up when the camcorder
receives a signal from the wireless controller.
+
PLAY
TAPE
,
(VCR)
TALLY LAMP•• ON
+
PLAY
CARD
,
(VCR)
E
29