Selecting Audio Output Channels - Canon MV MV4 Instruction Book

Selecting audio output channels

E
When you play back a tape whose audio has been recorded on multiple channels,
you can change the output channels of that sound.
( )
PLAY
VCR
( 34)
1. Load a tape recorded with multiple-channel audio.
2. Open the menu and select VCR SET UP. Then select OUTPUT CH,
set it to the desired setting and close the menu.
• Refer to the following list.
OUTPUT CH setting
L/R
L/L
R/R
96
VCR SET UP
Tape recorded with
stereo sound
L+R channels
L channel only
R channel only
OUTPUT CH•••L/R
Played back sound
Tape recorded on
multiple channels
main + sub
main only
sub only