Canon XM2 Instruction Manual page 128

Selecting a Title Image
E
+
TAPE CAMERA
1. Slide the POWER switch to CAMERA and the TAPE/CARD switch to TAPE.
2. Open the menu and select \ TITLE MIX.
• The title mix menu appears.
3. Select \ TITLE SELECT.
• Up to 6 titles images are displayed.
4. Select the title you wish to combine.
5. Press the SELECT dial in.
• You return to the title mix menu.
Activating the Title Mix
1. Slide the program selector to
• Title mix cannot be used in the [ (Easy Recording) program.
2. Press the MIX/SLIDE SHOW button.
• The selected title appears combined with your recording.
Recording the Combined Image onto the Tape as Movie
1. Press the start/stop button.
Recording the Combined Image onto the Tape as Still Image
1. Press the PHOTO button halfway.
• F flashes white and turns green and glows steady.
2. Press the PHOTO button fully.
• F disappears and the camcorder records the still image.
Protecting a Title Image
You can protect a title image to prevent accidental erasure.
• If you format a memory card, all images including the protected ones will be erased.
1. Open the menu and select CARD OPER.
2. Select \ TITLE PROTECT
• The title protect index screen appears.
3. Select the title image you wish to protect and press the SELECT dial in.
• The protect mark appears, and the title image cannot be erase.
• Press the SELECT dial again to cancel it.
128
Q
and select a recording program.
and press the SELECT dial in.