Canon XM2 Instruction Manual page 100

Dubbing
E
1. Find a point on your recorded cassette slightly before the section you wish to
copy and set it to playback pause mode.
2. Press the REC PAUSE button.
• S-video and audio IN/OUT terminals work as input terminals.
• The camera enters record pause mode.
3. Start playback on the other device or turn on the TV to see the desired
program while you monitor the picture.
4. Press the e/a (play/pause) button on the camcorder or the PAUSE a button on
the wireless controller.
• Recording starts.
5. When you get to the point where you wish to stop recording, press the stop
button or the pause button.
• Recording stops.
6. Stop playback on the other device.
Note:
• You can monitor the picture on the LCD screen/viewfinder.
100