Canon XM2 Instruction Manual page 59

Audio Level Indicator
Press the "AUDIO LEVEL" button to display the audio level indicator on the LCD screen/viewfinder.
Press the button again to cancel.
TAPE
AE Shift
• Only available when the recording program is set to AUTO, Tv or Av.
Press the "AE SHIFT" button to display the AE SHIFT menu. Pull the SELECT dial up or down and
select between –2.0 and +2.0. Press the SELECT dial in to close the menu.
Image Stabilizer
Press the "Image Stabilizer" button to turn the image stabilizer on/off.
Audio Attenuator
Use the audio attenuator if, during recording or audio dubbing you need to lower the volume level
or correct distortion of the input audio.
Press the "AUDIO ATT" button. Select ON or OFF by pulling the SELECT dial up or down and press
the SELECT dial in.
+
TAPE CAMERA
+
CAMERA CARD
,
+
TAPE CAMERA
,
+
TAPE CAMERA
+ PLAY
TAPE
,
(VCR)
+
CAMERA
+
CARD CAMERA
E
59