Canon XM2 Instruction Manual page 102

Turning the Analog-Digital Converter On
E
PLAY
+
TAPE
(VCR)
VCR SET UP
( 18)
To turn the analog-digital converter on, open the menu and select VCR SET UP.
Then select AV
Caution:
• For normal use, set AV \ DV OUT to OFF through the menu. If it is set to ON, you cannot input
digital signals through the camcorder's DV terminal.
• If you attempt to perform analog-digital conversion with a cassette inserted to the camcorder, the
converted signals may not be output to the connected digital video equipment.
• When connecting to a PC equipped with a DV terminal, you may not be able to transfer
converted signals to your PC, depending on the software you are using, and the specifications of
your PC and its settings.
102
AV DV OUT••• OFF
\ DV OUT, set it to ON and close the menu.