Canon MLT (S) User Manual page 19

5
Save the new parameters
To save new parameters as the default values of the Exposure Mode (except opening
from Study List), touch [SAVE PARAM]. The window displaying the following message
appears:
Are you sure you want to change the default generator parameters?
Then, touch [YES].
When Password is required
If the password is specified, a different message is displayed as follows:
Administrator's authority is needed. Enter system password.
In this case, touch within the frame to display On-Screen-Keyboard, type your
password, then touch [OK].
6
Close the QA Mode screen
Touch [OK].
When [OK] is not visible on the screen
If [OK] is not displayed on the screen, touch the
screen.
– 13 –
3.QA Mode Settings
button at the bottom part of the