Canon MLT (S) User Manual page 18

3.QA Mode Settings
2
Select MLT(S) FREQUENCY
If MLT(S) FREQUENCY is not currently selected (in this case, the ENHANCEMENT
and DYNAMIC RANGE tabs are not displayed), touch the Frequency Processing Mode
button to open the window, then touch [MLT(S) FREQUENCY].
When the Frequency Processing Mode button is not visible
If the Frequency Processing Mode button is not displayed on the screen, touch the
button at the bottom part of the screen.
3
Select the tab
To change enhancement and noise reduction, touch the ENHANCEMENT tab.
To change the dynamic range adjustment, touch the DYNAMIC RANGE tab.
4
Change the parameters
Change the parameters by referring to 3.2 Changing Enhancement (→ P.14),
3.3 Changing Noise Reduction (→ P.15), and 3.4 Changing Dynamic Range
Adjustment (→ P.16).
Frequency Processing Mode Window
– 12 –
Frequency
Processing
Mode
Button