Canon MLT (S) User Manual page 11

6
Select MLT (S) FREQUENCY
If MLT (S) FREQUENCY is not currently selected (in this case, the MLT(S) tab is not
displayed), touch the Frequency Processing Mode button to open the window, then
touch [MLT(S) FREQUENCY].
Frequency
Processing
Mode
Button
7
Select the tab
Touch the MLT(S) tab.
Screen Appearance when MLT(S) FREQUENCY is Selected
8
Set the parameters
Set the parameters by referring to 2.2 Setting Enhancement (→ P.7), 2.3 Setting
Noise Reduction (→ P.8), and 2.4 Setting Dynamic Range Adjustment (→
P.9).
Frequency Processing Mode Window
– 5 –
2.Edit Exposure Mode Settings
Continued on the following page >>