Fc Fnc1 Replacement Setting - Brother RJ-4030 Software Manual

^FC FNC1 replacement setting
ASCII: ^
Decimal: 94
Hexadecimal: 5E
Parameters
0≤n≤1
Description
Selects whether or not GS codes, which are included in barcode protocols such as GS1-128
(UCC/EAN-128), are replaced with FNC1 codes.
n: FNC1 replacement setting
(ON: 1; OFF: 0 (default))
This command is a dynamic command.
Remarks
Invalid if n is a value other than 1 or 0
Example
To disable FNC1 replacement:
Since FNC1 replacement will be disabled, n=0. Therefore, the command will be as follows.
^ F C 0
(5Eh 46h 43h 30h)
F C n
70 67 nd
46 43 nh
- 47 -
P-touch Template 2.0 Command Reference
7. Control Command Details