Text Layout Settings - Brother RJ-4030 Software Manual

4.1.3 Text Layout settings

Character styles specified in P-touch Editor all become the same style within an object.
If the "Long Text" setting is selected under "Text Layout" in P-touch Editor, the vertical alignment setting is
normally set for top alignment.
If the "Long Text" setting is selected under "Text Layout" in P-touch Editor and continuous length tape is
used, the print length is increased to fit the text.
If the "Fixed Frame Size (Wrap)" setting is selected under "Text Layout" in P-touch Editor, the object size
does not change, and the text size is reduced.
"Fixed Frame Size (Wrap)" is a setting that was added for inserting long text. Since it is possible that the
text size may become extremely small if the wrapping feature is no longer applied, we recommend that
"Fixed Frame Size" be selected when die-cut labels or a fixed length is specified in P-touch Editor, or that
"Automatic Length" be selected when an automatic media length is specified.
The text object size is fixed, and the text size is changed depending on the text
Shrink to Fit
length.
The text object size is fixed, and the text size is fixed. If the text is too long, the text
Clip Text
is not printed.
The text object width is fixed, and the text size is fixed. If the text is too long, the text
Long Text
object height is increased.
Automatic The text object height is fixed, and the text size is fixed. If the text is too long, the
Length text object width is increased.
The text size is fixed. If the text is too long, the text object width is increased. If a
Free Size
new line is started, the text height is increased.
Click the button circled in red to display a drop-down list, and then select the desired option.
Specifying a Text Layout setting
- 21 -
P-touch Template 2.0 Command Reference
4. P-touch Template 2.0 Limitations