Using P-Touch Template 2.0 - Brother RJ-4030 Software Manual

1. Using P-touch Template 2.0

(1) Specify the printer settings.
Using the P-touch Template Settings tool, specify the initial
printer settings according to the host system environment or
the host that the printer is connected to.
(Please refer to "2. P-touch Template Settings Tool User's
Guide" on page 4.)
The printer driver must first be installed via a USB
connection.
(2) Design the template.
Using P-touch Editor, design the template to be transferred
to the printer.
(Please refer to "4. P-touch Template 2.0
page 19.)
(3) Transfer the templates.
Using P-touch Transfer Manager, transfer the templates to
the printer.
(Please refer to the RJ Series Software User's Guide.)
(4) Program using P-touch Template 2.0 commands.
If any special commands are required to control the printer,
change the terminal program in accordance with the
P-touch Template 2.0 commands.
(Please refer to "6. Control Code
(5) Connect the printer with the host and print slips etc.
Transfer the data such as ASCII text from the host to
templates in the printer, and print the slips etc.
Limitations" on
Lists" on page 30.)
- 3 -
P-touch Template 2.0 Command Reference
1. Using P-touch Template 2.0