Rc Specify Line Feed Command Text String - Brother RJ-4030 Software Manual

^RC Specify line feed command text string
ASCII: ^
Decimal: 94
Hexadecimal: 5E
Parameters
0≤n1≤2
0≤n2≤9
00h≤datah≤FFh
Description
Specifies the text string for the line feed command.
(n1*10)+n2: Length of the text string (can be set between 1 and 20)
data: Text string (The maximum number of characters that can be set is 20 characters (bytes).)
The default text string for the line feed command is "^CR".
This command is a dynamic command.
Remarks
Invalid if more than 20 characters have been specified
Example
To change the text string for the line feed command to "0Dh 0Ah":
Since the text string to be specified (data) contains 2 characters, n1=0 and n2=2. Therefore, the command
will be as follows.
^ R C 0 2 0Dh 0Ah
(5Eh 52h 43h 30h 32h 0Dh 0Ah)
R C n1 n2 data
82 67 nd1 nd2 datad
52 43 nh1 nh2 datah
- 42 -
P-touch Template 2.0 Command Reference
7. Control Command Details