Esc Ixr2 Specify Line Feed Command Text String - Brother RJ-4030 Software Manual

ESC iXR2 Specify line feed command text string

ASCII: ESC i
Decimal: 27
Hexadecimal: 1B
Parameters
01h≤nh1≤14h
nh2: 00h (Fixed)
00h≤datah≤FFh
Description
Specifies the text string for the line feed command.
nh1+(nh2*256): Length of the text string (can be set between 1 and 20)
data:
The default text string for the line feed command is "^CR".
This command is a static command.
Remarks
Invalid if more than 20 characters have been specified
Example
To change the text string for the line feed command to "0Dh 0Ah":
Since the text string to be specified (data), contains 2 characters, nh1=02h and nh2=00h. Therefore, the
command will be as follows.
ESC i X R 2 02h 00h 0Dh 0Ah
(1Bh 69h 58h 52h 32h 02h 00h 0Dh 0Ah)
X R 2
105 88 82 50 nd1 nd2 datad
69 58 52 32 nh1 nh2 datah
Text string (The maximum number of characters that can be set is 20 characters
(bytes).)
n1 n2 data
- 70 -
P-touch Template 2.0 Command Reference
7. Control Command Details