Operation - Brookstone iConvert USB Turntable User Manual

oPeRaTIon

1 . Select the speed for the record to be played by setting the SPEED
SELECT BUTTON .
2 . Place a record on the turntable PLATTER . Use the 45 rpm record ADAPTER
on the turntable shaft when playing a 45 rpm, which has a large center hole .
3 . Remove the stylus protector cover and release the tonearm clip .
4 . Move the cueing lever to the "UP" position, then move the tonearm toward
the record . The turntable will start revolving .
5 . Position the tonearm above the first groove of the record and move the
cueing lever to the "DOWN" position, the tonearm will automatically and
gently come down onto the record's surface .
6 . At the end of the record, the tonearm will rise and return to the arm rest
and switch off the entire unit automatically .
7 . If you want to stop the record while it is playing, press the STOP button .
The tonearm will rise slowly and return automatically to the arm rest .
caUTion: do not touch the tonearm during the reject cycle.
UsInG ManUal cUeInG
The cueing lever is used when you want to momentarily interrupt the tonearm .
1 . Slowly move the lever to the "UP" position to interrupt playing .
2 . Slowly move the lever to the "DOWN" position to resume playing .
3 . Keep the cueing lever in the "DOWN" position when the turntable
is not in use .
7