Brookstone iConvert USB Turntable User Manual page 25

select > cursor to end - Selects from the cursor position to the end of the
selected tracks .
find Zero crossings - Modifies the selection slightly so that both the left and right
edge of the selection appear on a positive-slope zero crossing . This makes it easier
to cut and paste audio without resulting in an audible clicking sound .
selection save - Remembers the current selection (or cursor position), allowing
you to restore it later .
selection Restore - Restores the cursor position to the last position saved by
"Selection Save . "
Move cursor > to Track start - Moves the cursor to the start of the current track .
Move cursor > to Track end - Moves the cursor to the end of the currently
selected track .
Move cursor > to selection start - Moves the cursor to the start of the
current selection .
Move cursor > to selection end - Moves the cursor to the end of the
current selection .
snap-To > snap on - Enables "Snap-To" mode . When "Snap-To" mode is enabled,
the selection will be constrained to the nearest interval on the time scale, by default
the nearest second . So if you click and drag from 4 . 2 seconds to 9 . 8 seconds, it will
result in a selection from 4 seconds to 10 seconds, exactly . You can change the units
that are snapped to using the "Set Selection Format" option in the View Menu .
snap-To > snap off - Turns "Snap-To" mode off letting you select arbitrary
ranges of time .
Preferences - Opens the "Preferences" dialog .
24