Brookstone iConvert USB Turntable User Manual page 37

TRoUblesHooTInG
ProBleM
The recording sounds
loud and distorted .
The recording
is barely audible .
I cannot hear my
recordings once
I have transferred
them and tried to play
them on my computer .
While the USB
device is connected,
I cannot listen to any
music from my computer .
caUse
The USB device's
Gain level is set
too high .
The USB device's
Gain level is set
too low .
Computer audio
output not is
not set correctly .
Same as above .
solUTion
If your own USB device
is equipped with a Gain
knob, turn it down .
If your own USB device
is equipped with a Gain
knob, turn it up .
Make sure that your
computer's audio sound
card is selected as your
playback device . Please
note; depending upon
your computer, the
playback device will be
different but should not
say "USB Audio Codec . "
Same as above .
36