Audio Control Buttons - Brookstone iConvert USB Turntable User Manual

aUDIo conTRol bUTTons

skip to start - Moves the cursor to time 0 . If you press "Play"
at this point, your project will play from the beginning .
Play - Starts playing audio at the cursor position . If only some audio
is selected, only the selection is played .
loop - If you hold down the shift key, the "Play" button changes
to a "Loop" button, which lets you keep playing the selection over
and over again .
record - Starts recording audio at the project sample rate (the sample
rate in the lower-left corner of the window) . The new track will begin
at the current cursor position, so click the "Skip to Start" button first
if you want the track to begin at time 0 .
Pause - Temporarily stops playback or recording until you press
"Pause" again .
stop - Stops recording or playing . You must use the "Stop" button
before applying effects, saving or exporting .
skip to end - Moves the cursor to the end of the last track .
16