Brookstone iConvert USB Turntable User Manual page 11

6 . The software will split tracks automatically when it detects silence in the
music . To split tracks manually, deselect the box labeled "Automatically
Split Recording into Separate Tracks . " Note: This auto-track feature is only
available for PC users .
7 . When you are ready to start recording, click RECORD to immediately
play your music .
8 . You are now recording! You should hear the audio from the device through
your computer speaker and see the audio meters move on your
computer screen .
9 . If you have chosen to manually split the tracks, click NEW TRACK when
you hear the place in the song that you'd like to separate .
10 . When you have finished recording, click NEXT to proceed to the next step .
iMPorTanT: To ensure you've downloaded the entire final track to
your computer, you must wait for the recording time window to display
"recording finish" before you click on neXT.
11 . Once you have finished recording, enter the Artist, Album and Track Titles
by clicking and typing into the corresponding fields . If you have recorded
more than 10 tracks, you can access the 11-20 fields by clicking NEXT .
12 . When you are finished labeling your tracks, click NEXT to begin exporting your
recording to iTunes . Make sure you allow the exporting process to complete .
10