Aastra CT9143i Release Note page 12

IP Phone Release Notes 2.3
New Features in Release 2.3
Configuring LLDP-MED Using the Configuration Files
Use the following parameters to configure LLDP-MED on the IP Phones.
Parameter–
lldp
LLDP
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter–
lldp interval
LLDP Packet Interval
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter–
use lldp elin
Use LLDP ELIN
(in Web UI)
Description
Format
Default Value
Range
Example
8
Configuration Files
IP Phone UI
Aastra Web UI
Enables or disables Link Layer Discovery Protocol for Media Endpoint
Devices (LLDP-MED) on the IP Phone.
Boolean
1 (enabled)
0 (disabled)
1 (enabled)
lldp: 0
Configuration Files
Aastra Web UI
The amount of time, in seconds, between the transmission of LLDP Data
Unit (LLDPDU) packets. The value of zero (0) disables this parameter.
Integer
30
0 to 2147483647
lldp interval: 60
Configuration Files
Aastra Web UI
Enables or disables the use of an Emergency Location Identification Number
(ELIN) received from LLDP as a caller ID for emergency numbers.
Boolean
1 (enabled)
0 (disabled)
1 (enabled)
use lldp elin: 0
aastra.cfg, <mac>.cfg
Options->Administrator Menu->
Network Settings->Ethernet&VLAN->
LLDP Support
Advanced Settings->Network->
Advanced Network Settings
aastra.cfg, <mac>.cfg
Advanced Settings->Network->
Advanced Network Settings
aastra.cfg, <mac>.cfg
Basic Settings->Preferences->General
RN-001029-02, Release 2.3, Rev 00