Commissioning Of Solar Controller - Baxi MULTIFIT Evacuated Tube Collector Kit Instructions

Diagram of all possible symbols
1
Display Screen
2
Scroll upwards
4
Scroll downwards or select required main menu
3
Scroll left or exit to main menu
5
Scroll right or select to edit function
Example Screen - Programming Menu
© Baxi Heating UK Ltd 2011
Main Menu
Sub-Menu
1
2
3 5
4
Control Button
14.0

Commissioning of solar controller

14.1 Main Menu
To make the operation of the controller clear, operating and display
functions are divided into 4 main menus.
Info Indication of current measured values.
Indication of system condition.
Indication of error messages.
Indication of operating hours and energy
productivity (if installed).
Programming Changes to programmable values
(parameters).
Manual operation Switching on and off connected pumps
and auxiliary devices.
WARNING - During manual operation
there is no automatic regulation of the
system. Temperature control is isolated.
System temperature could be
extremely high.
Basic adjustment Information about basic adjustment for
system function. To carry out any
changes to this menu it must be
selected within the first minute after
switching the appliance on.
IMPORTANT: Adjustment and changes
in this menu must only be carried out
by a competent installer or service
engineer.
Each active menu is shown in the upper line of the display by its
corresponding icon.
14.2 Control Button
When in the Main Menu the control button functions are as follows:
Item 2 - Scroll upwards- no function in this menu
Item 3 - Scroll left - moves left through the main menu
options
Item 4 - Scroll down - selects the menu option currently
flashing and gives access to the sub-
menu
Item 5 - Scroll right - moves right through the main menu
options
Once the sub-menu has been accessed, the flashing symbol
becomes static and the button functions are then as follows:
Item 2 - Scroll upwards- moves up through the available
functions of the sub-menu
Item 3 - Scroll left - return to main menu
Item 4 - Scroll down - moves down through the available
functions of the sub-menu
Item 5 - Scroll right - select to edit the function displayed.
The selected function will flash if it is
available for editing. Use 2 to increase the
required value and 4 to reduce it.
Use 5 to OK.
29