Installation; Electrical Connection - Baumatic P610SS Instruction Manual

o Place a coin horizontally into one of the small slots and rotate
the coin clockwise. You will feel part of the plastic sealing section
disengage from the door.
o Repeat this process for the other slots and you will be able to lift
the plastic sealing section away from the top of the door.
o This will allow you to access the inner door glasses.
o Carefully slide out the middle door glass removing it from the
oven door.
o IMPORTANT: Be careful to note which way around the
oven door glass sits inside the oven door. YOU MUST put
the door glass back into the oven door the same way
around.
o IMPORTANT: Care must be taken when cleaning between
the door glasses, and inside the inner frame as some of
the edges may be sharp due to the manufacturing
process.
o When refitting, slide the inner door glass back into the oven door
and then the middle door glass. IMPORTANT: Ensure that the
glass sits properly in the recess at the base of the oven
door and that it is the same way around as it was
originally.
o Refit the plastic sealing section to the top of the oven door,
pushing it downwards to clip it back into position.

INSTALLATION

The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o UK Regulations and Safety Standards or their European
Norm Replacements.
o Building Regulations (issued by the Department of the
Environment).
o Building Standards (issued by the Scottish Development
Department).
o IEE Wiring Regulations.
o Electricity At Work Regulations.
28