Setting The Start And End Time Function; Adjusting The Audible Signal - Baumatic P610SS Instruction Manual

60 cm multifunction built-in oven.
Hide thumbs Also See for P610SS:
Table of Contents

Advertisement

Setting the start and end time function

This function will allow you to set a time in the future that the
oven switches on at and a time that the oven will switch off at.
o Use the thermostat control knob (5) to set the temperature that
you require. The manual operation symbol (14) will appear on
the display.
o Use the oven function selector knob (1) to select the mode of
cooking that you require.
o Press the duration button (7) and the display will show a value
of 00:00. Set the period of time that you wish to cook for, by
using the minus (10) and plus (11) buttons. The word AUTO
will appear on the timer display.
o Immediately press the end cook button (8) and the timer
display will show the value 00:00. Set the time of day that you
want the oven to switch off at, using the minus and plus buttons.
o The oven will calculate what time it needs to switch on at, so
that your food will cook for the length of time that you selected.
It will automatically switch itself on, once it reaches the time of
day that it has calculated.
o When the time of day reaches the end of cooking time that you
set, the oven will switch off and an alarm will sound. The word
AUTO will flash and the heating symbol will disappear.
o To silence the audible signal and return the oven to manual
operation mode, once the start and end time function has been
used. To do this you should press the manual operation button,
the word AUTO will disappear from the display and the manual
operation symbol will appear instead.
o Important: If you do not turn the thermostat control knob and
oven function selector knob to 0. Then the appliance will
continue to operate as soon as you press the manual operation
button.

Adjusting the audible signal

o The audible signal has three different settings, low, medium and
high.
o To adjust the level of the audible signal, make sure that the
timer is in manual mode. Then press and hold the minus button
and you will hear the current level that is set.
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P630ssP620blP620ss

Table of Contents