User Manual
LAN 1-4
WLAN
Rear Panel
Rear Panel
Label
9V 50Hz .8A
4-1
WAN
RESET
Antenna
Page 10 of 102
Flashing
The device connected to the corresponding port is active.
Off
No wired device is connected to the corresponding port
On
An inactive device is connected to the corresponding port
Flashing
The device connected to the corresponding port is active.
Off
No wireless device connected to the router
Flashing
Access point is enabled
Description/Function
AC power socket
Ethernet port
Port for connecting to a cable or DSL modem
To manually reset the router, unplug the power first. Press RESET then plug the
power cord without releasing RESET for 3-4 seconds. When the SYS LED lights
up, release RESET and then wait for the router to restart.
Access point