Aztech WL830RT4 User Manual page 77

ICMP-FLOOD Packets threshold: (5 ~ 3600) The default value is 50. Enter a value
between 5 ~ 3600 packets. When the current ICMP-FLOOD Packets number sis
beyond the set value, the router will start up the blocking function immediately.
Enable UDP-FLOOD Filtering Enable or Disable the UDP-FLOOD Filtering.
UDP-FLOOD Packets threshold: (5 ~ 3600) The default value is 50. Enter a value
between 5 ~ 3600 packets. When the current UPD-FLOOD Packets numbers is
beyond the set value, the router will start up the blocking function immediately.
Enable TCP-SYN-FLOOD Attack Filtering Enable or Disable the TCP-SYN- FLOOD
Attack Filtering.
TCP-SYN-FLOOD Packets threshold: (5 ~ 3600) The default value is 50. Enter a
value between 5 ~ 3600 packets. When the current TCP-SYN-FLOOD Packets
numbers is beyond the set value, the router will start up the blocking function
immediately.
Ignore Ping Packet from WAN Port Enable or Disable ignore ping packet from WAN
port. The default is disabled. If enabled, the ping packet from the Internet cannot
access the router.
Forbid Ping Packet from LAN Port Enable or Disable forbidding Ping Packet to
access the router from the LAN port. The default value is disabled. If enabled, the
ping packet from the LAN port cannot access the router. (Defends against some
viruses)
Click Save to save the settings.
Click Blocked DoS Host Table to display the DoS host table by blocking.
Blocked Host List
User Manual
Page 77 of 102