Table of Contents
Advertisement
User Manual
FAQ
1. How do I configure the router to access Internet by ADSL users?
First, configure the ADSL modem configured in RFC1483 bridge model.
Connect the Ethernet cable from your ADSL modem to the WAN port on the router.
The telephone cord plugs into the Line port of the ADSL modem.
Login to the router, click the Network menu on the left of your browser, and click
WAN submenu. On the WAN page, select PPPoE for WAN Connection Type. Type
user name in the User Name field and password in the Password field, finish by
clicking Connect.
If your ADSL lease is in pay-according-time mode, select Connect on Demand or
Connect Manually for Internet connection mode. Type an appropriate number for
Max Idle Time to avoid wasting paid time. Otherwise, you can select Auto-
connecting for Internet connection mode.
2. How do I configure the router to access Internet by Ethernet users?
Login to the router, click the Network menu on the left of your browser, and click
WAN submenu. On the WAN page, select Dynamic IP for WAN Connection Type,
finish by clicking Save.
Some ISPs require that you register the MAC Address of your adapter, which is
connected to your cable or DSL modem during installation. If your ISP requires
MAC register, login to the router and click the Network menu link on the left of
your browser, and then click MAC Clone submenu link. On the MAC Clone page, if
your PC's MAC address is proper MAC address, click Clone MAC Address and your
PC's MAC address will fill in the WAN MAC Address field. Or else, type the MAC
Address into the WAN MAC Address field. The format for the MAC Address is XX-
XX-XX-XX-XX-XX. Click Save. Changes take effect after rebooting.
Page 94 of 102
Advertisement
Table of Contents
