Table of Contents
Advertisement
User Manual
Start IP Address This field specifies the first of the addresses in the IP address
pool. 192.168.1.100 is the default start address.
End IP Address This field specifies the last of the addresses in the IP address pool.
192.168.1.199 is the default end address.
Address Lease Time The Address Lease Time is the amount of time in which a
network user will be allowed connection to the router with their current dynamic
IP Address. Enter the amount of time, in minutes. The user will be leased this
dynamic IP Address. The range of the time is 1 ~ 2880 minutes. The default value
is 120 minutes.
Default Gateway (Optional) Suggest to input the IP address of the LAN port of the
router, default value is 192.168.1.1
Default Domain (Optional.) Input the domain name of your network.
Primary DNS (Optional.) Input the DNS IP address provided by your ISP. Or consult
your ISP.
Secondary DNS (Optional.) Input the IP address of another DNS server if your ISP
provides two DNS servers.
Note: To use the DHCP server function of the router, you must configure all computers
on the LAN as Obtain an IP Address automatically mode. This function will take effect
until the router reboots.
Page 55 of 102
Advertisement
Table of Contents
