Table of Contents
Advertisement
User Manual
Caution: Sometimes the connection cannot be disconnected although you specify a
time to Max Idle Time, since some applications is visiting the Internet continually in
the background.
Connect Automatically Connect automatically after the router is disconnected.
Select to use this option.
Time-based Connecting You can configure the router to connect or disconnect
based on time. Enter the start time in HH:MM format for connecting and end time
in HH:MM format for disconnecting in the Period of Time fields.
Note: Only when you have configured the system time on System Tools -> Time page,
will the Time-based Connecting function can take effect.
Connect Manually You can configure the router to make it connect or disconnect
manually. After a specified period of inactivity (Max Idle Time), the router will
disconnect from the Internet connection, and you will not be able to re-establish
your connection automatically as soon as you attempt to access the Internet
again. Select to use this option. If you want your Internet connection to remain
active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the
number time in minutes that you wish to have the Internet connecting last unless
a new link is requested.
Caution: Sometimes the connection cannot be disconnected although you specify a
time to Max Idle Time, since some applications are visiting the Internet continually in
the background.
Page 33 of 102
Advertisement
Table of Contents
