Specifications - Axminster AW16BMST User Manual

Initial Assembly....
W
A X M I N S T E R
W H I T E Note: You don't have to assemble the distance stop rods unless you require to
produce a series of mortises.
5) Locate both distance stop rods and collar clamps assemblys. Slide the collar onto the
distance steel rod. Push the steel rod into the pre-drilled hole on the side of the morticers
casting and clamp in place with the grub screw. (See fig 4a ) ( Do not over tighten) Adjust
the collar to the desired position and clamp in place by turning the handle. (See fig 4b)
Repeat for the other side.
Fig 4
Specification
Axminster No.
Motor
Motor Speed
Width of Table
Max Clamping Width
Depth of Table (in front of the backfence)
Maximum Reach (Fence to centre of auger)
Chisel Capacity
Chisel Mounting Shank Size
Chuck Capacity
Weight
Footprint with Distance Stops & operating handle fitted
08
Grub screw
Handle
Width 500mm x Depth 440mm x Height 765mm
Distance stop rod
Collar
600531(AW16BMST)
Single phase 230V a.c. 50 Hz 370W
Fig 4a
Fig 4b
1400rpm
180mm
125mm
157mm
37mm
6-16mm
19.05mm
1-13mm
42kgs