Hardware Overview; Connectors - Axis Q6035 PTZ User Manual

Ptz dome network camera
Table of Contents

Advertisement

AXIS Q6035 PTZ Dome Network Camera

Hardware Overview

Hardware Overview
1
Part number (P/N) & Serial number (S/N)
2
Network connector (PoE+)
3
Multi-connector
4
SD card slot (SDHC)
5
Status LED indicator
6
Control button
7
Power button

Connectors

For technical specifications, see
Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet Plus (PoE+) IEEE 802.3at. Use the supplied midspan.
NOTICE
Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network
cable (STP) may be appropriate or required. Any network cables that are routed in outdoor environments or similar shall be
shielded (STP) and intended for their specific use. Make sure that the midspan is properly grounded. See
Compatibility (EMC)
page 56
.
for regulatory requirements.
1
2
3
5
4
5
6
7
Electromagnetic

Advertisement

Table of Contents
loading

This manual is also suitable for:

Q6035

Table of Contents