Focusing - Axis 210A User Manual

Focusing

To focus the AXIS 210A
Unscrew the focus puller on the lens.
Adjust the focus as required. Re-tighten the
focus puller.
To focus the AXIS 211A
Follow the instructions below.
1. From the Basic Configuration page
in your browser, open the Focus
adjustment page.
2. Set the DC-Iris to Disabled and click
Save.
3. Unscrew the zoom puller on the lens
by turning it anti-clockwise. Adjust
the zoom setting as required.
Re-tighten the zoom puller.
4. Unscrew the focus puller on the lens. Adjust the focus as required. Re-tighten.
5. From the Focus adjustment page, set the DC-Iris to Enabled and click Save.
Note:
The DC-Iris should always be disabled while focusing the camera. This opens the iris to its maximum, which
gives the smallest depth of field and thus the best conditions for correct focusing. When the focus is set
with this method it is maintained in any light condition.
AXIS 210A/211A - Accessing the Camera
Focus puller
Zoom puller
(Tele/wide)
Focus puller
AXIS 210A
AXIS 211A
11