Scanning Channels (For Advanced Users) - Avermedia AVerTV 6 User Manual

4.2.2 Scanning Channels (For Advanced Users)

1. Click Advance located in the lower right corner of the Program
Information section. Then the Advance Program Configuration
dialog box will appear.
2. When there are channels missing from the channel memory,
select All Frequencies or Single Frequency.
3. Once you select Single Frequency, you need to specify the
correct Frequency, for example 533000 (KHz), and Bandwidth.
4. Then click Scan.
5. After scanning,
memorized and listed in the left pane of the dialog box.
6. Click Apply to save the scanned channels.
Note: All Frequencies Scanning may take you a while. Please be patient.
new active channels/programs
35
AVerTV 6
will be