Table of Contents
Advertisement
Page 26 - Using Windows CCFP Administration
MSF Status
The MSF Status page shows messages coming from the DECT system to
handsets. The level of status messages can be altered to show more or less
information.
Checking & changing the Status Level
1. Select Status Message Level.
2. To see the current status level select View Curent Status Level.
3. To change the status level select from one of the levels (0-3) displayed.
4. Note that the level resets to Level 0 at the end of any CCFP
Status Message
The Status Message page will display, in real time, the system activities.
E.g. handset subscription, base station handovers and handset connection
options, etc. selected previously in MSF Status on page 26.
Uploading Flash Software
Occasionally upgrade software for the Compact DECT may be supplied in
the form of a "flash.ktb" file or similar for upload to the system. This upgrade
file requires specific 'upload' software. Both of theses are available from the
web site (https://emea-businesspartner.avaya.com/index.asp) as a self-
extracting files.
To upload software, disconnect the power supply, remove the top cover from
the CDBS and set the bootstrap shorting strap to the 'upload' position (see
diagram on page 23). Restore the power supply and connect, using the serial
cable, the CDBS to the PC (see page 23).
Note:
1. From the CCFP menu bar select Options and then Preferences.
2. Select the Advanced Options tab.
3. Use the file menu to select the .ktb file to upload.
4. On completion, return the bootstrap shorting strap to the 'normal' position
Page 26
MSF Status
Administration session.
Uploading new software will cause the system to restart and end
any current calls. You must also ensure that any pre-requisites for
the new software (such as appropriate hardware and software PCS
levels) have been met.
Click on the Transfer Flash Program to CCFP.
and replace the top cover.
Compact DECT - Installation Manual
38DHB0002UKFH – Issue 5 (27th October 2003)
Advertisement
Table of Contents
