Table of Contents
Advertisement
Using Windows CCFP Administration
The CCFP Administration Program
The CCFP Administration program is Version 8. The CCFP Administration
program (see Uploading Flash Software on page 26) is a Windows program for
the on-line editing and management of the live DECT system database.
Programming Connection
Programming requires a PC with a 9-pin D-type serial port or a suitable
adapter. For direct PC connection a PC-DCU cable is supplied with each
DCU (see Compact DECT Base Station to PC Programming Cable on page 44).
Alternatively modems can be used for remote connection (see Compact DECT
Base Station to Modem Programming Cable on page 44). Both cable are plugged in
to the PC Connection Socket (see below).
For normal CCFP programming, ensure that the bootstrap shorting strap is in
the 'normal' position. For flash software uploads (see page 26) the shortening
strap must be across the two right hand vertical pins, i.e. in the diagram
above, remove the strap, turn it clockwise through 90° and replace.
Installing CCFP Admin
The CCFP Admin program is supplied on the IP Office Administration CD,
within the DECT folder, as a self-installing program. It is also available from
the web site (http://emea-businesspartner.avaya.com.) as a self-extracting
file.
Insert the IP Office Administration CD and halt the Autorun. Manually open
the CD and, from the DECT folder, open the CCFP Admin. 8.0 folder. Select
Setup and follow the instruction provided by the Installation Wizard.
Compact DECT - Installation Manual
38DHB0002UKFH – Issue 5 (27th October 2003)
Bootstrap shorting
strap in normal
position
Bootstrap pins
PC Connection Socket
Using Windows CCFP Administration - Page 23
The CCFP Administration Program
Page 23
Advertisement
Table of Contents
