Starting Ccfp Admin - Modem Connection - Avaya Compact DECT Installation Manual

Table of Contents

Advertisement

Starting CCFP Admin - Modem Connection

Starting CCFP Administration
1. Check that your modem is on and connected.
2. Locate and click on the CCFP Administration icon.
3. A start-up display appears. The base of the display shows the current
4. The moving bar across the display allows approximately 10 seconds to
5. A configuration display appears. It will state:
6. After a caution message, the main CCFP Administration screen
7. In the Modem control section, select Dial Number. Dialer Setup
8. Watch the Receive Status display to check on the modem connection
9. After clicking on Proceed the screen shows handset Registration page.
Compact DECT - Installation Manual
38DHB0002UKFH – Issue 5 (27th October 2003)
– Windows 95/NT: Located in Start | Programs | CCFP
Administration.
communications settings that will be used to connect with the DECT
system.
change the communication settings (see Changing the Communications
Configuration on page 24) before it attempts to make the connection with
the DECT system.
-
500 System Configuration Detected
Ensure that the correct system configuration has been selected
(see Changing the Communications Configuration on page 24).
appears with the Status page displayed.
appears.
– Use this menu to select the DECT system you want to dial. Use the
Add and Remove buttons to create and delete entries. If you do make
any changes ensure that you select Save Database to File to save
them.
– With the Company to which you want to connect displayed, click on
Dial. The Dialer Setup menu will close.
progress.
– If CONNECT appears then the modem link has been established and
you can start DECT programming by clicking on Proceed.
– If CONNECT does not appear there is a problem with establishing a
modem link that must be checked. Use File | Exit to close the program
and then check the serial port, serial cable and DECT system.
The progress indicator at the top-right of the screen shows the progress
in copying down the DECT system's settings.
Using Windows CCFP Administration - Page 25
Starting CCFP Admin - Modem Connection
Page 25

Advertisement

Table of Contents
loading

Table of Contents