Assembly; Video Output; Afocal Lens - ATN OTS-30 Operator's Manual

2.2. ASSEMBLY

2.2.1. VIDEO OUTPUT

The OTS incorporates a sealed Connector used for video transmis-
sion. Video Cable attaches the scope to the video facilities for video
recording or video transmission.
Connect the monocular to an external video display/recorder as
follows:
1. Remove the protective cap from the connector socket.
2. Attach the video cable to the OTS output connector socket.
3. Attach the RCA plug of the video cable to a compatible jack
on an external video display/recorder, or extension cable.
2.2.2. 2X AFOCAL LENS
2X afocal lens is optical dubler specifically designed for thermal ima-
ging systems. Using interchangeable connectors the lens can connect
to the OTS. Focal length of the system simply increases by a factor of
2. To install 2X afocal lens screw it into the objective lens of scope.
OTS 2X afocal lens is shock and vibration tested.
2-4
Figure 2-2. Attaching Video Cable
Figure 2-3. OTS with 2X Afocal Lens