ATN PVS-14 Operator's Manual page 27

Night vision multi-purpose systems
Table of Contents

Advertisement

TABLE 2.1. MONOCULAR CONTROLS AND INDICATORS
CONTROLS AND
INDICATORS
power Switch
reSet/
oFF
on
Ir/
pUll
CAUTION
Do not use excessive force to place the power switch into the momentary
IR position.
low Battery
Indicator
Ir Source on
Indicator
Gain Control
(pVS-14 only)
objective
Focus
Diopter
adjustment
eye relief
adjustment
latch
Battery polar-
ity Indicators
Controls monocular and Ir source, on or oFF.
Same as system oFF. also resets monocular
after high light cut-off.
Monocular activated.
turn the knob clockwise to momentarily ac-
tivate the Ir source. pull and turn the knob
clockwise from the on position to continu-
ously activate theIr source.
When blinking it indicates a low battery condition with
less than 30 minutes of battery life remaining. It is
visible through the eyepiece just outside the intensified
field-of-view.
When blinking it indicates a low battery condition with
less than 30minutes of battery life remaining. It is
visible through the eyepiece just outside the intensified
field-of-view.
adjusts the system gain from a minimum value of
approximately 25 to a maximum value greater than
3,000.
Focuses objective lens. adjusts for sharpest image of
viewed object.
Focuses eyepiece lens for use without the need
for glasses. adjust for sharpest image of intensifier
screen.
adjusts the distance between your eye and the
monocular.
latch used for separation of monocular from head-
mount/helmet mount adapter.
this feature, molded into the battery housing, shows
the proper orientation of the battery. Some versions
have a bubble molded into the top of the battery house,
to show the + for proper orientation.
FUNCTIONS
2-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

6015

Table of Contents