ATN PVS-14 Operator's Manual page 61

NOTE
The helmet mount provides two positions for the user to posi-
tion the MUNVM. The flipped down position allows the user to
position the MUNVM directly in front of the eyes. The helmet
mount also allows the user to rotate the MUNVM to a flipped
up position when the MUNVM is not needed for immediate
use. Both the flipped down and the flipped up positions have
a positive stop which assures the user that the MUNVM is in
the correct position.
NOTE
The headmount/helmet mount adapter allows the MUNVM to be
rotated from the left to the right eye or vice versa. The MUNVM
can be moved to the flipped up position with the headmount/
helmet mount adapter positioned to either the left or the right.
(1) ensure that the battery are installed per paragraph 2.3.2.
(2) Don the helmet mount per instructions in paragraph 2.3.9.
(3) place the monocular in the socket of the helmet mount.
Set your eye relief by depressing the side buttons (or press down
on side lever on metal mount) (see Figure 2.21.) and carefully move
the monocular fore or aft until the eyecup comfortably seals around
the eye. readjust the helmet straps as required for vertical adjust-
ment.
plaStIC MoUnt
tIlt aDJUStMent
loCK KnoB
SoCKet
FIGURE 2.21. TILT AND FLIP-UP ASSEMBLY MECHANISMS
(4) turn power switch to on. adjust the tilt by using the tilt ad-
justment lock knob (or tilt adjustment lever on metal mount)
(Figure 2.21.) until you obtain a comfortable viewing angle.
SIDe
BUttonS (2 ea)
(Fore-anD-aFt
aDJUStMent)
Metal MoUnt
tIlt aDJUStMent
leVer
(Fore-anD-aFt
aDJUStMent)
SoCKet
SIDe leVer
2-37